import geometry of fliud from abaqus for FSI simulation

mina.m · October 26, 2013, 04:01

Hi,

I have imported the geometry of fluid from abaqus with surface mesh method, but The STAR-CMM+ mapper reported that mapping is failed!

please help me, if Someone has already imported the geometry from abaqus.

mina.m · October 26, 2013, 06:07

please give me any suggestion for import cad geometry of fluid to star ccm for co simulation with abaqus.

nyquisty · October 31, 2013, 02:25

The surface you export not mean only the fluid wall surface. You have to assign the fluid wall surface in Abaqus to a surface set, then write the whole model to a inp file.

I think you export the fluid wall surface only.

mina.m · October 31, 2013, 11:32

Quote:

Originally Posted by nyquisty

The surface you export not mean only the fluid wall surface. You have to assign the fluid wall surface in Abaqus to a surface set, then write the whole model to a inp file.

I think you export the fluid wall surface only.

Dear nyquisty
thanks a lot for your consideration

October 26, 2013, 04:01	import geometry of fliud from abaqus for FSI simulation	#1
mina.m New Member mina Join Date: Oct 2013 Posts: 4 Rep Power: 13	Hi, I have imported the geometry of fluid from abaqus with surface mesh method, but The STAR-CMM+ mapper reported that mapping is failed! please help me, if Someone has already imported the geometry from abaqus.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FLuent simulation of taylor couette flow of concentric cylinder geometry.	rshbhb	FLUENT	53	November 5, 2014 19:07
[ICEM] geometry import problem	jayanth1990	ANSYS Meshing & Geometry	2	October 8, 2013 14:25
Mesh and geometry import in cfx-pre	Francesco	CFX	7	May 30, 2012 08:04
import catia geometry in icem v10	anorky	Main CFD Forum	4	December 26, 2009 01:15
How to import the PRO/E geometry negative volume	Flavio	CFX	4	October 18, 2006 15:25

October 26, 2013, 06:07		#2
mina.m New Member mina Join Date: Oct 2013 Posts: 4 Rep Power: 13	please give me any suggestion for import cad geometry of fluid to star ccm for co simulation with abaqus.

October 31, 2013, 02:25		#3
nyquisty New Member Join Date: Jan 2013 Posts: 4 Rep Power: 14	The surface you export not mean only the fluid wall surface. You have to assign the fluid wall surface in Abaqus to a surface set, then write the whole model to a inp file. I think you export the fluid wall surface only.