Home > Forums > Software User Forums > Siemens > STAR-CCM+

Fatal Error in Star CCM+ 6.02v

Mark Forums Read

Reply

Search this Thread

September 22, 2014, 05:46	Fatal Error in Star CCM+ 6.02v	#1
agrawal18 New Member Vishal Join Date: Sep 2014 Posts: 1 Rep Power: 0	Hi, While generating volume mesh, my file is getting crashed. Error message : "Server connection failed. This is usually due to a fatal error in the server". Same file is working fine on other system, with same configuration. Can any one suggest the reason and solution for this.

Reply

Tags

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 23:15
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 05:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 05:38
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15
error while compiling the USER Sub routine	CFD user	CFX	3	November 25, 2002 16:16

All times are GMT -4. The time now is 19:27.