CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Mesh around a cylinder

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 14, 2014, 12:05
Default Mesh around a cylinder
  #1
New Member
 
Join Date: Nov 2014
Posts: 1
Rep Power: 0
Charles.hyndman is on a distinguished road
Hi All,

I'm trying to generate a body fitted mesh (O-tpye mesh) around a cylinder, and struggling to generate it in star. Currently I'm using meshing models Trimmer, surface remesher and prism layer mesher.

My aim is to generate the following mesh:


Any suggestions would be very helpful! Thanks.
Charles.hyndman is offline   Reply With Quote

Reply

Tags
cylinder, mesh, star ccm+

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
[snappyHexMesh] Layers:problem with curvature giulio.topazio OpenFOAM Meshing & Mesh Conversion 10 August 22, 2012 10:03
rotating cylinder using sliding mesh Tim Daly FLUENT 1 November 10, 2008 00:02
ICEM block mesh with a ball in a cylinder tube Li CFX 6 August 11, 2008 06:44
mesh problem for cylinder akr FLUENT 1 January 30, 2007 00:43


All times are GMT -4. The time now is 11:22.