Floating point exception error

jsb12136 · March 3, 2015, 10:51

Hi,all.
I am trying use Star ccm+ to simulate the rotation of a vertical axis water turbine with 3 blades. The model is regarded as a disk rotating in a stationary region. The results went diverge and "Floating point exception error". I use scalar scene to observe the flow velocity through the disk (which is the region of swept area ). I found that the velocity went sky high at the interface between the disk region and the stationary region. I have tried to change the mesh size, time step, interface boundary conditions, but nothing helps.

Please help me to break this ice so I can continue my study.

ggulgulia · March 3, 2015, 13:24

can you extenuate on the rotation motion method? Is it MRF, RBM or overset method. In case it's Rigid Body Motion (RBM) or Moving Reference Frame (MRF) you need to make sure that you've created the z-axis at the center of the disc

jsb12136 · March 3, 2015, 14:41

Quote:

Originally Posted by ggulgulia

can you extenuate on the rotation motion method? Is it MRF, RBM or overset method. In case it's Rigid Body Motion (RBM) or Moving Reference Frame (MRF) you need to make sure that you've created the z-axis at the center of the disc

No, its not rigid body motion. I have created z-axis and its a disk fluid region I made it rotating.

March 3, 2015, 10:51	Floating point exception error	#1
jsb12136 New Member Xiaosong Zhang Join Date: Oct 2014 Posts: 14 Rep Power: 11	Hi,all. I am trying use Star ccm+ to simulate the rotation of a vertical axis water turbine with 3 blades. The model is regarded as a disk rotating in a stationary region. The results went diverge and "Floating point exception error". I use scalar scene to observe the flow velocity through the disk (which is the region of swept area ). I found that the velocity went sky high at the interface between the disk region and the stationary region. I have tried to change the mesh size, time step, interface boundary conditions, but nothing helps. Please help me to break this ice so I can continue my study.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
error compiling modified applications	yvyan	OpenFOAM Programming & Development	21	March 1, 2016 04:53
Undeclared Identifier Errof UDF	SteveGoat	Fluent UDF and Scheme Programming	7	October 15, 2014 07:11
[General] 2 datas on one plot	Akuji	ParaView	46	December 1, 2013 14:06
Floating point error and divergence detected	aannjj	FLUENT	0	July 2, 2013 03:44
[Gmsh] Gmsh and samplesurface	touf	OpenFOAM Meshing & Mesh Conversion	2	December 10, 2007 02:27

March 3, 2015, 13:24		#2
ggulgulia Senior Member Gajendra Gulgulia Join Date: Apr 2013 Location: Munich Posts: 144 Rep Power: 13	can you extenuate on the rotation motion method? Is it MRF, RBM or overset method. In case it's Rigid Body Motion (RBM) or Moving Reference Frame (MRF) you need to make sure that you've created the z-axis at the center of the disc