Which model is accurate for cooling water jacket simulation?

manupp · May 5, 2015, 22:20

I am simulating cooling water jacket for my academic project purpose using starccm 9.04 version. In tutorials two approach is demonstrated 1) VOF Boiling model and Eulerian multiphase mix model. Since i am a beginner in CFD and STARCCM please suggest me one model and en-light me me with the reason for the choice ?

My inlet conditions are mass flow rate of 3 kg/s at 80 C temperature and 1.2 bar pressure.

only temperature specified at fire deck and cylinder wall at 250 C
outlet is pressure outlet kept at 0 gradient and temperature 25 C

( Many journals had gone with VOF model but i had not came across anyone specifying Eulerian multiphase mix model and had seen only in starccm )

ggulgulia · May 22, 2015, 00:02

Constant density model would be appropriate for real gas properties for liquid

May 5, 2015, 22:20	Which model is accurate for cooling water jacket simulation?	#1
manupp New Member manu Join Date: May 2015 Posts: 3 Rep Power: 10	I am simulating cooling water jacket for my academic project purpose using starccm 9.04 version. In tutorials two approach is demonstrated 1) VOF Boiling model and Eulerian multiphase mix model. Since i am a beginner in CFD and STARCCM please suggest me one model and en-light me me with the reason for the choice ? My inlet conditions are mass flow rate of 3 kg/s at 80 C temperature and 1.2 bar pressure. only temperature specified at fire deck and cylinder wall at 250 C outlet is pressure outlet kept at 0 gradient and temperature 25 C ( Many journals had gone with VOF model but i had not came across anyone specifying Eulerian multiphase mix model and had seen only in starccm )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No liquid water exist in my Fuel Cell simulation	fatchang	FLUENT	19	October 15, 2018 14:27
Simulation of a single bubble with a VOF-method	Suzzn	CFX	21	January 29, 2018 00:58
Using radiation model for simulation of flat plate solar collector	marjanbn	FLUENT	1	February 24, 2017 17:22
Simulation Water and Oil URGENT problem	alexandrelp	CFX	3	May 5, 2014 21:20
Displying interface of liquid water using VoF model	pchoopanya	FLUENT	2	March 15, 2013 16:42

May 22, 2015, 00:02		#2
ggulgulia Senior Member Gajendra Gulgulia Join Date: Apr 2013 Location: Munich Posts: 144 Rep Power: 13	Constant density model would be appropriate for real gas properties for liquid