CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

CFD Simulation of a swimming pool using STAR CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 13, 2016, 09:06
Default CFD Simulation of a swimming pool using STAR CCM+
  #1
New Member
 
Samuel Alfred
Join Date: Jul 2015
Posts: 9
Rep Power: 7
samoalfred is on a distinguished road
Hello everyone.I want to simulate a swimming pool using STAR CCM+.Please how do I set it up. Any ideas please ? It is urgent. I want to set up a two dimensional model.
samoalfred is offline   Reply With Quote

Old   January 17, 2016, 09:07
Default
  #2
New Member
 
Hamed
Join Date: Jul 2012
Posts: 14
Rep Power: 10
aroma is on a distinguished road
What do you want to simulate in the pool? your question is too general.
aroma is offline   Reply With Quote

Old   January 17, 2016, 17:18
Default
  #3
New Member
 
Samuel Alfred
Join Date: Jul 2015
Posts: 9
Rep Power: 7
samoalfred is on a distinguished road
OK I want to simulate a counter current swimming pool .I want to use either a 2D and 3D models.I want to be sure about setting up the physics and boundary conditions. That is what I need help about. Please I can drop my mail if that will be better for communication. Thanks.
samoalfred is offline   Reply With Quote

Old   January 17, 2016, 17:43
Default
  #4
New Member
 
Hamed
Join Date: Jul 2012
Posts: 14
Rep Power: 10
aroma is on a distinguished road
I am not very experienced in free surface simulation. Try this one (http://www.cd-adapco.com/sites/defau...eric%20VoF.pdf).

You may need to use VOF.

Hope it helps.
Cheers,
Aroma
aroma is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shall I leave one core free when I run CFD simulation? Pierre1 Main CFD Forum 1 March 12, 2015 04:46
Compressor Simulation in Star CCM+ chili023 STAR-CCM+ 13 August 11, 2011 02:22
CFD-analysis of hydroplane: STAR CCM or Flow Simulation? peterg07 Main CFD Forum 0 February 7, 2010 14:32
[Other] StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 04:38
HELP!:CFD modelling using FLUENT in swimming pool Tee Main CFD Forum 0 September 7, 2005 20:48


All times are GMT -4. The time now is 05:01.