CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

StarCCM+ Tutorials

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 13, 2016, 13:56
Post StarCCM+ Tutorials
  #1
kby
New Member
 
Kanwar
Join Date: Feb 2016
Posts: 6
Rep Power: 2
kby is on a distinguished road
Hi
I need to use this software for my University Project. Need to simulate mixing of air and methane in a pressure vessel. Anyone knows any good tutorial I could do to get started. I know how to do the meshing. It's mainly the selecting models and solver properties which I struggle with.
kby is offline   Reply With Quote

Old   February 14, 2016, 14:34
Default
  #2
Senior Member
 
Lane Carasik
Join Date: Aug 2014
Posts: 203
Rep Power: 5
lcarasik is on a distinguished road
Quote:
Originally Posted by kby View Post
Hi
I need to use this software for my University Project. Need to simulate mixing of air and methane in a pressure vessel. Anyone knows any good tutorial I could do to get started. I know how to do the meshing. It's mainly the selecting models and solver properties which I struggle with.
Fortunately enough, but not easily found are the tutorials in the user manual. Assuming you have a local copy of it, you can find a copy of the manual though this file pathing:

C:\Program Files\CD-adapco\STAR-CCM+10.06.010\doc

Of course, our versions maybe different and our speicific install drive.

If you have access to the Steve Portal through CD-Adapco, you can find the same tutorials on there as well under "Documentation"

Good luck
lcarasik is online now   Reply With Quote

Old   February 15, 2016, 12:46
Default
  #3
kby
New Member
 
Kanwar
Join Date: Feb 2016
Posts: 6
Rep Power: 2
kby is on a distinguished road
Thanks for help. I had a look at the tutorial doc and I was hoping you could tell me what models I should select to show mixing of two gases. This way I can find the tutorials specific to my project.
kby is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[BEGINNER] Problems running tutorials (incompressible) in OF 2.xx Jaro OpenFOAM Running, Solving & CFD 8 March 16, 2016 08:27
OpenFOAM video tutorials RAUL OpenFOAM Announcements from Other Sources 9 August 27, 2014 07:00
[DesignModeler] Help with tutorials jony ANSYS Meshing & Geometry 0 May 14, 2013 00:41
Help with tutorials jony FLUENT 0 May 13, 2013 03:51
Problems with starccm mesh AndTen OpenFOAM Meshing & Mesh Conversion 1 February 23, 2010 05:43


All times are GMT -4. The time now is 01:37.