CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Lagrangian Multiphase Particles Crossing Walls

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   March 17, 2016, 07:55
Default Lagrangian Multiphase Particles Crossing Walls
New Member
Join Date: Mar 2016
Posts: 3
Rep Power: 7
Pfernandes is on a distinguished road

I'm new in star ccm+ and i have an issue using Lagrangian Multiphase.
I have a cylinder as region (all surfaces are walls) and when I put spherical particles some of them cross the wall and others stay inside. The dimensions of the cylinder are: D=300mm and L=60mm. I tried befor with a Cylinder with D= 50mm and L=50mm, and all the particles stayed inside the cylinder.

Anyone can help?

Thank You,

Pedro Fernandes
Pfernandes is offline   Reply With Quote


dem, interactions, lagrangian

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Boundary Layer Mesh in GMSH Medu OpenFOAM Meshing & Mesh Conversion 1 September 1, 2021 04:43
[ICEM] Shadow walls in Fluent. ICEM meshes vs Workbench aarvay ANSYS Meshing & Geometry 11 January 12, 2017 13:51
Boundary-adapt refinement with interior "dummy" walls thomas. FLUENT 0 July 27, 2015 11:10
Flowlines crossing stationary walls davidvalladares FloEFD, FloWorks & FloTHERM 1 August 1, 2014 03:27
Enforce bounds error with heat loss boundary condition at solid walls Chander CFX 2 May 1, 2012 21:11

All times are GMT -4. The time now is 02:36.