CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

Trimmer Mesh Errors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 4, 2016, 15:33
Default Trimmer Mesh Errors
  #1
New Member
 
Teena T.
Join Date: Mar 2013
Location: Germany
Posts: 12
Rep Power: 6
tiatabasco is on a distinguished road
Hallo!

I tried to use Trimmer mesh on a cylinder and when I look the cross section of the mesh it is not symmetrical and has some bad cells in it ... I do not know if they are bad but they don't look rectangular. What could be the reason. I used the same with a bigger base value n looks fine. What could be wrong? How can I get rid of it?
Attached Images
File Type: jpg TrimmerMesh.JPG (161.1 KB, 9 views)
tiatabasco is offline   Reply With Quote

Old   July 5, 2016, 01:31
Default
  #2
Senior Member
 
kevin alun
Join Date: Sep 2011
Location: Germany
Posts: 106
Rep Power: 7
marmot is on a distinguished road
It could be graphics, try changing slightly the section where you cut or plot the 3D mesh but use a cutting plane to see if it really is that way.

In the Geometry options there is something called face culling, try changing this it could improve how the mesh is displayed (but not always)
marmot is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help for the small implementation in turbulence model shipman OpenFOAM Programming & Development 25 March 19, 2014 11:08
Micro Scale Pore, icoFoam gooya_kabir OpenFOAM Running, Solving & CFD 2 November 2, 2013 14:58
AMI interDyMFoam for mixer nu problem danny123 OpenFOAM Programming & Development 8 September 6, 2013 02:34
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10


All times are GMT -4. The time now is 15:27.