|
[Sponsors] |
July 4, 2016, 16:33 |
Trimmer Mesh Errors
|
#1 |
New Member
Teena T.
Join Date: Mar 2013
Location: Germany
Posts: 14
Rep Power: 13 |
Hallo!
I tried to use Trimmer mesh on a cylinder and when I look the cross section of the mesh it is not symmetrical and has some bad cells in it ... I do not know if they are bad but they don't look rectangular. What could be the reason. I used the same with a bigger base value n looks fine. What could be wrong? How can I get rid of it? |
|
July 5, 2016, 02:31 |
|
#2 |
Senior Member
kevin alun
Join Date: Sep 2011
Location: Germany
Posts: 106
Rep Power: 14 |
It could be graphics, try changing slightly the section where you cut or plot the 3D mesh but use a cutting plane to see if it really is that way.
In the Geometry options there is something called face culling, try changing this it could improve how the mesh is displayed (but not always) |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help for the small implementation in turbulence model | shipman | OpenFOAM Programming & Development | 25 | March 19, 2014 11:08 |
Micro Scale Pore, icoFoam | gooya_kabir | OpenFOAM Running, Solving & CFD | 2 | November 2, 2013 14:58 |
AMI interDyMFoam for mixer nu problem | danny123 | OpenFOAM Programming & Development | 8 | September 6, 2013 03:34 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 07:42 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 19:10 |