conjugate-gradient solver did not converge (troubleshooting)

dennis722 · July 24, 2016, 14:10

I'm simulating a FSAE car and Im using the same settings as in a simulation i did before and there was everthing right. But now im getting this after 11 iterations and after every iteration i have reversed flow, i haven't had this in my earlier simulation.
I don't know what can be wrong here...

I'm using the Surface Wrapper, because of many errors and sharp-edged wings

marmot · July 24, 2016, 16:53

i thought we talked about this already,
reduce relaxation factors
make sure cell quality remediation is on,
right click your regions to remove invalid cells

reverse flow is not a problem in the beginning that usually clears up,

dennis722 · July 24, 2016, 17:11

i have no invalid cells, put the acceleration method->none and turned on the cell quality remediation. But i have still the problem

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEMFC model with FLUENT	brahimchoice	FLUENT	22	April 19, 2020 15:44
No converge solver massBuoyantBoussinesqSimpleFoam	mol018	OpenFOAM Running, Solving & CFD	5	March 5, 2016 03:25
Preconditioned Conjugate Gradient Solver!	Chidu	Main CFD Forum	1	January 21, 2004 11:43
Block Matrix Solver Using Conjugate Gradient	John	Main CFD Forum	2	July 31, 2001 12:08
Poisson eq and conjugate gradient method	Gary Dantinne	Main CFD Forum	2	March 19, 1999 00:24

July 24, 2016, 16:53		#2
marmot Senior Member kevin alun Join Date: Sep 2011 Location: Germany Posts: 106 Rep Power: 14	i thought we talked about this already, reduce relaxation factors make sure cell quality remediation is on, right click your regions to remove invalid cells reverse flow is not a problem in the beginning that usually clears up,

July 24, 2016, 17:11		#3
dennis722 Member Dennis Join Date: Jul 2016 Location: Germany Posts: 39 Rep Power: 9	i have no invalid cells, put the acceleration method->none and turned on the cell quality remediation. But i have still the problem