How to report values of Cell_Set

erzdemir · August 10, 2016, 04:16

Hello,

When I run report that I generated by selecting expression and use cell_set in definition I get error as "Cannot evaluate field function Cell Set" .

Is there anyway to report the values on cell set?

marmot · August 11, 2016, 06:47

perhaps first you need to use a volume average or min/max report to get the value you want out of the cell set, than use an expression report if you do calculations with that value,

Schwob77 · August 11, 2016, 10:06

An expression report has to deliver one single value for the whole expression. If you add a cell set to the definition there are two different values in the expression, i.e. 1 and 0. That's why the expression cannot be evaluated.

You need to set up the expression in a way that all parameters contained are constants at a given point of time. It can contain constants (in space) field functions and other reports.

August 10, 2016, 04:16	How to report values of Cell_Set	#1
erzdemir New Member erdal Join Date: Apr 2014 Posts: 22 Rep Power: 12	Hello, When I run report that I generated by selecting expression and use cell_set in definition I get error as "Cannot evaluate field function Cell Set" . Is there anyway to report the values on cell set?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Values for nu t and nu tilda	Phizz82	OpenFOAM Running, Solving & CFD	1	March 2, 2020 06:00
Mapping values from 2D mesh to 3D mesh boundary during runtime	benk	OpenFOAM Programming & Development	1	June 13, 2014 02:39
Local values at BC cel-expressions	Wonderz	CFX	7	October 31, 2013 10:50
Jump in epsilon values near the wall : low re k-epsilon model	malaboss	OpenFOAM Verification & Validation	1	February 1, 2013 16:36
Ensight - node values -cell values	leo	FLUENT	1	May 12, 2010 08:47

August 11, 2016, 06:47		#2
marmot Senior Member kevin alun Join Date: Sep 2011 Location: Germany Posts: 106 Rep Power: 14	perhaps first you need to use a volume average or min/max report to get the value you want out of the cell set, than use an expression report if you do calculations with that value,

August 11, 2016, 10:06		#3
Schwob77 Member Join Date: Nov 2015 Posts: 38 Rep Power: 10	An expression report has to deliver one single value for the whole expression. If you add a cell set to the definition there are two different values in the expression, i.e. 1 and 0. That's why the expression cannot be evaluated. You need to set up the expression in a way that all parameters contained are constants at a given point of time. It can contain constants (in space) field functions and other reports.