CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Forced motion is not following my command

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 7, 2016, 11:16
Default Forced motion is not following my command
  #1
New Member
 
Xiaosong Zhang
Join Date: Oct 2014
Posts: 14
Rep Power: 11
jsb12136 is on a distinguished road
Hey guys. I am simulating a three-blade vertical axis turbine and it is a forced motion simulation. I input the same rotation motion equations for the 3 blades separately, but the results of torque I got are not right. These results should be in the same pattern with a 120deg delay but they are not. I captured the motion animations and found that the blades are actually not moving as I commanded. What I am really confused is that since it is a forced motion simulation, the blades should moving as the function I input. (I have monitored the function as well and it is absolutely right.) Why does this happen and what is the solution of this situation?
jsb12136 is offline   Reply With Quote

Reply

Tags
forced motion, motion simulation, star ccm+ v9, vertical axs

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 46 September 11, 2021 08:38
Prescribed mesh motion does not correspond to actual motion rbarrett CFX 8 June 30, 2011 14:22
UDF hook problem in command line mode. Benlong FLUENT 1 November 12, 2007 15:45
tank motion on boat Tim FLUENT 0 May 23, 2007 12:50
large scale mesh motion sb FLUENT 1 April 27, 2007 23:23


All times are GMT -4. The time now is 03:46.