|
[Sponsors] |
Wave stripping, Free-stream velocity / Constant |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 20, 2017, 10:14 |
Wave stripping, Free-stream velocity / Constant
|
#1 |
Member
Join Date: Nov 2015
Posts: 57
Rep Power: 10 |
Hello,
I am modeling a gas jet impinging a fluid film (fluid film model + lagrangian). The multiphase interaction has the models: edge stripping and wave stripping. In the wave stripping model there are 4 parameters to change, 2 of them that influence directly the stripping phenomenon (cH and the gas velocity scaling factor). cH comes into the formula of the minimum height necessary for droplet ejection, default value 1.0 and K_infinite (gas velocity scaling factor), the default value is 10. Does someone have experience with this model and especially changing the values of K_infinite? Cheers |
|
Tags |
wave stripping |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
fluid flow but temperature raises from nowhere? | mxcfd | STAR-CCM+ | 5 | September 16, 2014 05:46 |
Free stream temperature in convective bc | vivek bharadwaj g | FLUENT | 2 | July 17, 2014 00:30 |
PISO predictor-corrector scheme for non-divergence free velocity | blais.bruno | OpenFOAM Programming & Development | 0 | April 23, 2014 12:03 |
vary free stream velocity | siddu.pk | ANSYS | 0 | March 21, 2014 01:23 |
Velocity on Free Surface Boundary | Lin F.F | Main CFD Forum | 3 | August 4, 2001 11:30 |