how to simulate hetergeneous reation in fixed bed reactor
Hello everyone,
I am working with a simulation of heterogeneous reaction (gas-liquid phase with solid catalyst) in fixed bed reactor. Physical model I chose: • Eulerian multiphase • Gradients • Multiphase Equation of State • Multiphase Interaction • Multiphase Segregated Flow • Phase Couple Fluid Energy • Steady • Three Dimensional And I set the region as porous Region and defined 2 phases (1 multi-component liquid and 1 multi-component gas) and then specified the liquid as continuums phase and the gas as dispersed phase. But after selecting the Interphase Mass Transfer Model, what I got from the Interphase Mass Transfer Rate group box doesn't include Interphase reaction, there are only Boiling Mass Transfer Rate and UD Interphase Mass Flux. What can I do to activate the Interphase reaction? And how can I define the catalyst in this case? Thanks for helping!! |
All times are GMT -4. The time now is 21:21. |