CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

sail meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 26, 2017, 11:52
Default sail meshing
  #1
New Member
 
André
Join Date: Oct 2017
Posts: 1
Rep Power: 0
chpcbr is on a distinguished road
Hi Guys,
I know there are other threads like this, but I couldn’t succeded with them, so I give a new try.
I prefer to make a sail flow analyses. it comes from the design softwer in dxf or stl file.
I cannot mesh the sail. can you help me with some tips? if needed I can add the file itself.
I tried buffle but at the end no volume meshing.
Thanks,
André
chpcbr is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] 3D coil mesh: can't create the volume? RomainBou OpenFOAM Meshing & Mesh Conversion 3 July 18, 2016 06:09
[Gmsh] Vertex numbering is dense KateEisenhower OpenFOAM Meshing & Mesh Conversion 7 August 3, 2015 11:49
meshing a wing sail linyx FLUENT 0 April 28, 2011 00:23
meshing a wind sail linyx FLUENT 7 April 6, 2011 03:57
Meshing of a 2-D Sail Model ersahino Siemens 2 April 9, 2010 17:45


All times are GMT -4. The time now is 05:13.