|
[Sponsors] |
October 3, 2018, 09:57 |
velocity inlet profile
|
#1 |
New Member
Shekhar
Join Date: Jun 2015
Location: Pune-India
Posts: 3
Rep Power: 10 |
Dear friends,
I've tried to create velocity inlet profile in my analysis. by below method, 1) Inlet type > velocity inlet 2) velocity specification > Magnitude + Direction 3) Flow direction specification > components by this way an analysis was solved correctly. However, when I see the velocity magnitude is very less as it was in .csv table file(exported from previous analysis) But the flow direction seems ok. Can anyone please suggest, why the velocity magnitude is not considered in this analysis. |
|
October 3, 2018, 10:37 |
|
#2 | |
Senior Member
|
Quote:
Cross check your co-ordinate system for assigning the values and reporting the values. Both co-ordinate sys should be same. I prefer to create one by myself at inlet. Hope this helps. |
||
October 26, 2018, 09:20 |
|
#3 |
New Member
Shekhar
Join Date: Jun 2015
Location: Pune-India
Posts: 3
Rep Power: 10 |
Thanks for suggesting. I will check the co-ordinate system.
Though I have not changed the co-ordinate system for both analysis. It was set to global. I think As per your suggestion, I need to create local co-ordinate system while exporting velocity results. and same sys at Inlet (where the coupling is to be done) |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
combining parabolic inlet velocity profile with time varying velocity vector values | jawapasu | OpenFOAM | 3 | July 10, 2023 06:41 |
Velocity inlet BC profile | antonio.c | FLUENT | 1 | November 1, 2017 15:22 |
[swak4Foam] Inlet velocity profile for turbulent pipe flow using swak4Foam | zordiack | OpenFOAM Community Contributions | 5 | February 23, 2016 02:52 |
extracting outlet velocity profile from one case to another case's inlet | tonggysun | OpenFOAM | 2 | September 13, 2013 05:19 |
Export & Import Velocity profile as Inlet | eRzBeNgEl | STAR-CCM+ | 6 | March 26, 2012 06:16 |