|
[Sponsors] |
October 17, 2018, 12:11 |
Flow over 4 airfoils in STAR-CCM+ -2D case
|
#1 |
Member
JOHN SHERJY SYRIAC
Join Date: May 2018
Posts: 35
Rep Power: 7 |
Hi
I am trying to simulate flow over 4 airfoil one kept in the wake of another airfoil in 2D case. Rectangular domain is taken as the flow domain with K-omega model with polyhedral mesh. Chord length c= 0.605m Top and bottom surface = 5c -(symmetry plane) inlet velocity =109 m/s outlet = Pressure outlet I am not able to get the predicted flow output. After some time, there is zero velocity zones in the domain. I have no clue why is it happening. It would be grateful if anyone could help me figure out the problem. I hereby attach the velocity scalar scene of the flow. Thank you in advance |
|
October 17, 2018, 13:42 |
|
#2 |
Senior Member
Matt
Join Date: Aug 2014
Posts: 947
Rep Power: 17 |
How many iterations? What do your residuals look like? How are you initializing the solution?
You need to provide more info. |
|
October 18, 2018, 23:09 |
|
#3 |
Member
JOHN SHERJY SYRIAC
Join Date: May 2018
Posts: 35
Rep Power: 7 |
time step = 7.989*10^-5
the problem happens after around 0.5sec the residuals converge upto less than 10^-4 |
|
Tags |
airfoil 2d, star-ccm+ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 06:40 |
[DesignModeler] DesignModeler Scripting: How to get Full Command Access | ANT | ANSYS Meshing & Geometry | 53 | February 16, 2020 15:13 |
'2-phase' gas-liquid flow validation on this case. | Ash Kot | FLUENT | 0 | June 1, 2017 18:25 |
2 phase flow validation on this case. | Ash Kot | Fluent Multiphase | 0 | May 31, 2017 03:11 |
Setting up a case for a plane plate in a longitudinal flow | Chronique | OpenFOAM Running, Solving & CFD | 0 | October 9, 2014 14:17 |