CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

two-ways FSI problem on co-simulation star ccm+ and abaqus

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 25, 2018, 21:26
Default two-ways FSI problem on co-simulation star ccm+ and abaqus
  #1
New Member
 
鲍健
Join Date: Dec 2018
Posts: 7
Rep Power: 2
baojian is on a distinguished road
recently,I use star-ccm+ co-simulation to combine star-ccm+ and abaqus to achieve two-ways FSI problem about VIV.I monitor the displacement of one point on the riser middle ,it appears changes.but in pressure contour the riser can not deform ,I can not configure the problem
baojian is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem: FSI + DFBI motion in Star CCM mohammadizadi STAR-CCM+ 1 April 30, 2018 16:01
abaqus star ccm co simulation Mustafalboro STAR-CCM+ 0 July 25, 2017 16:13
Star CCM+ and Abaqus coupling (FSI) Mustafalboro STAR-CCM+ 0 July 7, 2017 05:26
prestrain in FSI problem mina.m STAR-CCM+ 0 October 31, 2013 11:39


All times are GMT -4. The time now is 20:09.