CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Server Errors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 2, 2019, 21:47
Default Server Errors
  #1
New Member
 
Join Date: Apr 2019
Posts: 4
Rep Power: 3
cdimock72 is on a distinguished road
after I run a simulation using a macro I get a server error when i change the direction of my reports (star.common.vectorphysicalquantity_#### does not exist)
additionally when i try to edit the parts i get a partgroup_#### does not exist

both of these errors are fixed when i close out and reload the simulation but for macro purposes it would be helpful to not have these errors come up.

is there a fix for this that does not involve closing the simulation?


edit: these errors do not seem to actually break anything they just end the macro when they come up. Perhaps there is a way to suppress them? I have tried @suppresswarning("all") but thathas not worked regardless of case.

Last edited by cdimock72; April 2, 2019 at 23:18.
cdimock72 is offline   Reply With Quote

Old   April 3, 2019, 14:56
Default
  #2
Senior Member
 
Lucky Tran
Join Date: Apr 2011
Location: Orlando, FL USA
Posts: 4,004
Rep Power: 48
LuckyTran has a spectacular aura aboutLuckyTran has a spectacular aura about
Well clearly your macro is up to no good. Without seeing the macro, nobody can suggest any fixes.
LuckyTran is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pimpleDyMFoam computation randomly stops babapeti OpenFOAM Running, Solving & CFD 5 January 24, 2018 05:28
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 42 May 14, 2012 20:48
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 04:03
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 02:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 18:07


All times are GMT -4. The time now is 03:26.