CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Question to Volumetric Control meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   July 3, 2019, 10:25
Default Question to Volumetric Control meshing
New Member
Join Date: May 2019
Posts: 6
Rep Power: 3
Dexonin is on a distinguished road
Hey Guys,

i want to simulate gas running trough a pipe with a cylinder inside. For more exact results i want the mesh right before and behind the cylinder to be more refined. So I created parts (cylinders) and placed them where i want them to be. With volumetric controles I set the cell size from the cylinders at 10% from the original size. So far so good, but now when i generate the mesh, its only past half of my fluid....
And when i want to run the sim it gives me this problem report:
A floating point exception has occurred: floating point execption [Overflow]

Dunno if this error report is referring to the helf generated mesh, but if you guys know any answer the either of the questions, I would greatly appreciate it.
Dexonin is offline   Reply With Quote


mesh 3d, over flow, volumetric control

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Fluent] Meshing Question student123123 Mesh Generation & Pre-Processing 1 July 20, 2019 01:52
[ANSYS Meshing] Control number of element in thickness with ANSYS MESHING emspinosa ANSYS Meshing & Geometry 6 March 9, 2018 14:52
[ICEM] Control of tetra meshing Benzouz ANSYS Meshing & Geometry 0 August 3, 2015 11:20
[ANSYS Meshing] Structured Volumetric Meshing in Workbench for a Sphere AS_Aero ANSYS Meshing & Geometry 0 March 19, 2013 06:28
Volumetric Control Problem boathead STAR-CCM+ 5 April 1, 2011 13:46

All times are GMT -4. The time now is 09:45.