replace temperature
Hi guys,
only a short question, maybe someone can help me. I am using Vof and try to replace the temperature for Volume Fraction of Air = 1 every timestep. Is that possible and when yes how? Thanks. Michael |
Hello Mike,
Yes, is possible. I know two ways. You can specify the temperature as a field fuction of timestep or as a table with two columns, one temperature and the other time step and use the timestep interpolation method. I hope it helps. Mirel |
Thank you for your reply. I already have a field function for the new temperature. There is already a field function defined for the temperature of the model. How can I set a new Temperature Field every timestep?
|
Hello Mike,
Sorry for the late answer but I was off the grid for the past weeks. Did you solved your issue? If not I can try to help you on this topic. Mirel |
if you want to change the temperature on a boundary then apply your temperature field function at the boundary
if you want to change the temperature within all the air then you do this using a volume source and there is a great steve support article to advise on this concept but I cant remember the article other than if you search for 'monkey' you will find it since the found article shows how to set local momentum values using sources |
Hi guys,
thanks for your reply. I think I have found a solution. But I have a second question. Is it possible in CCM+ to use a mass source in a vof based model? thanks |
yes - clearly explained in the user guide
|
Thats true, but i can not find it in the model tree. In the user guide it is written, that in every flow region mass source can be activated
|
All times are GMT -4. The time now is 04:07. |