STAR CCM+ Diameter Measurement

akarfirath · September 30, 2019, 01:52

Hello everybody. I am new at STAR CCM+ and trying to get familiar to it. But I couldn't figure out, how to measure diameter of a part. Could you please help me with that issue.
Thank you very much.

jalvathi · September 30, 2019, 05:27

I am not sure about diameter measurement possibility in StarCCM. I am aware of the measure distance tool which I use to get a rough idea about the dimensions in my simulation. It will have a ruler icon and appars in between section plane icon and Show all meshes icon.

akarfirath · September 30, 2019, 05:58

I think I found the solution but maybe there are simpler solutions. When you open the geometry in the 3D-CAD tab and right click the feature>Properties and all information related with feature written in the output screen

cwl · October 12, 2019, 09:10

Quote:

but maybe there are simpler solutions

Nope. It's the 14th version - and we still have only a shitty ruler which is a disgace - compared to any other CAD software.

September 30, 2019, 01:52	STAR CCM+ Diameter Measurement	#1
akarfirath New Member gago Join Date: Jul 2019 Location: Turkey Posts: 9 Rep Power: 6	Hello everybody. I am new at STAR CCM+ and trying to get familiar to it. But I couldn't figure out, how to measure diameter of a part. Could you please help me with that issue. Thank you very much.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 22:15
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 04:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 04:38
error in star ccm	maurizio	Siemens	3	October 16, 2007 05:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

September 30, 2019, 05:27		#2
jalvathi New Member Jalvathi Join Date: Apr 2019 Posts: 7 Rep Power: 7	I am not sure about diameter measurement possibility in StarCCM. I am aware of the measure distance tool which I use to get a rough idea about the dimensions in my simulation. It will have a ruler icon and appars in between section plane icon and Show all meshes icon.