CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   STAR-CCM+ (https://www.cfd-online.com/Forums/star-ccm/)
-   -   New to StarCCM+ need help with split by patch surface (https://www.cfd-online.com/Forums/star-ccm/222553-new-starccm-need-help-split-patch-surface.html)

m0j0jojo November 28, 2019 13:45

New to StarCCM+ need help with split by patch surface
 
1 Attachment(s)
I wanted to know how to get a deleted surface, back. I went on split by patch to name my surfaces and I named a surface and then deleted, but that surface is gone, and I dont know how to get get it back. As you can see in the attached photo, my front face is missing. :(

Thanks

cwl November 28, 2019 15:39

Just delete this body from Parts and import it (or create from 3D-CAD) again.

m0j0jojo November 28, 2019 16:46

Quote:

Originally Posted by cwl (Post 751006)
Just delete this body from Parts and import it (or create from 3D-CAD) again.

Thanks for the reply,

I luckily had it saved prior to me deleting the surface, so i just closed it and open it back up, and the my front face was back.

But i think thats a pretty bad design since you cannot undo the mistakes like you can with Solidworks Flow simulation.


All times are GMT -4. The time now is 04:21.