CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

2 stroke engine Simulation: Overset Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 7, 2020, 06:17
Red face 2 stroke engine Simulation: Overset Mesh
  #1
New Member
 
J P
Join Date: Jan 2020
Posts: 3
Rep Power: 6
Jasoneering is on a distinguished road
Hi there,

Thanks for adding me to the forum, i hope to be able to help others as well as learn from the discussions!

I am trying to replicate a simulation demonstrated in 2016 during a presentation from (then) CD-adapco.

The link below is to the pdf of the presentation..

http://2016.oversetgridsymposium.org...16-uhlmann.pdf


I am trying to replicate the first case, where the regular overset interface is used.. but all i end up with is either a model that wont run or a moving region that slides up and down in the background region without being trimmed when it gets to the top of the cylinder.

If i understand right, according to page 5 the top and bottom of the piston region should not be walls, but overset boundaries.. but in this case the model does not run with an error message that the “active overset behaviour needs to be mirrored on both sides..”

If anyone would like a .sim file to help me debug this, i am happy to oblige!


Update: i have now solved the issues i was having with the overset mesh and interfaces, if anyone wants to know more details, please write me or write to this post.

Thanks,
jason

Last edited by Jasoneering; January 22, 2020 at 17:10. Reason: Update
Jasoneering is offline   Reply With Quote

Old   January 22, 2020, 17:22
Default Update
  #2
New Member
 
J P
Join Date: Jan 2020
Posts: 3
Rep Power: 6
Jasoneering is on a distinguished road
Hi All,

I have solved the issues I had with the mesh, the interfaces and the overset boundaries. if anyone wants more info please write me or in this post.

Thanks
jason
Jasoneering is offline   Reply With Quote

Reply

Tags
engine, overset mesh, two stroke

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
engine simulation with mesh motion and topological changes abminternet OpenFOAM Running, Solving & CFD 143 March 20, 2021 15:22
Gambit problems Althea FLUENT 22 January 4, 2017 04:19
Fatal overflow error, singularity, due to local mesh form? Thomasbr CFX 7 July 8, 2016 10:57
About Two Stroke engine simulation kevin6116 STAR-CD 0 September 6, 2011 04:58
Simulation of a four stroke engine cycle Alfred Herman.S. Siemens 1 May 27, 2002 08:05


All times are GMT -4. The time now is 02:29.