flow uniformity downstream a metallic foam

nalamyogesh · March 11, 2020, 08:49

Hello,

I would like to evaluate the flow uniformity for a flow downstream a metallic foam. Is it correct to use porous region technique to evalute flow uniformity? Or is there any other way ?

I know the foam properties like pores per inch material of foam.

Thanks,
Yogesh

LuckyTran · March 11, 2020, 10:53

The porous media model is (for the most part) a linear isotropic homogeneous approach. You can't get the velocities of a pore and in-between pores.

Given a uniform flow in front of the porous media, there will be a uniform flow after it. You can't simulate the disturbance of the pores in the porous media and how they de-homogenize the flow.

Given a non-uniform flow in front of the porous media, there will be a slightly more uniform flow after it due to the Darcy term. The porous media homogenizes the flow, and this you can simulate.

fluid23 · March 11, 2020, 11:24

I concur with the above statement, but would point out that the physical velocity formulation for porous media (as opposed to the superficial velocity formulation) can give net velocity through the pore structure. This will not, however, model the microscale jets in the outflow emanating from the pores.

The model is still intended to capture bulk downstream effects.

nalamyogesh · March 12, 2020, 04:33

Thank you so much for your responses. The cross section of my Porous media also keeps changing. Inlet and Outlet areas of the porous media are not the same.

I will try to prepare a smaller model of the same porous structure and see the effects of change in area!!

March 11, 2020, 08:49	flow uniformity downstream a metallic foam	#1
nalamyogesh Member Yogesh Nalam Join Date: Sep 2012 Location: München, Germany Posts: 54 Rep Power: 13	Hello, I would like to evaluate the flow uniformity for a flow downstream a metallic foam. Is it correct to use porous region technique to evalute flow uniformity? Or is there any other way ? I know the foam properties like pores per inch material of foam. Thanks, Yogesh

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Review: Reversed flow	CRT	FLUENT	1	May 7, 2018 05:36
[mesh manipulation] RefineMesh Error and Foam warning	jiahui_93	OpenFOAM Meshing & Mesh Conversion	4	March 3, 2018 11:32
InterDyMFoam+simpleFunctionObject	Elham	OpenFOAM Running, Solving & CFD	5	July 10, 2017 11:59
simpleFoam parallel	AndrewMortimer	OpenFOAM Running, Solving & CFD	12	August 7, 2015 18:45
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 04:04

March 11, 2020, 10:53		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,668 Rep Power: 65	The porous media model is (for the most part) a linear isotropic homogeneous approach. You can't get the velocities of a pore and in-between pores. Given a uniform flow in front of the porous media, there will be a uniform flow after it. You can't simulate the disturbance of the pores in the porous media and how they de-homogenize the flow. Given a non-uniform flow in front of the porous media, there will be a slightly more uniform flow after it due to the Darcy term. The porous media homogenizes the flow, and this you can simulate.

March 11, 2020, 11:24		#3
fluid23 Senior Member Matt Join Date: Aug 2014 Posts: 947 Rep Power: 17	I concur with the above statement, but would point out that the physical velocity formulation for porous media (as opposed to the superficial velocity formulation) can give net velocity through the pore structure. This will not, however, model the microscale jets in the outflow emanating from the pores. The model is still intended to capture bulk downstream effects.

March 12, 2020, 04:33		#4
nalamyogesh Member Yogesh Nalam Join Date: Sep 2012 Location: München, Germany Posts: 54 Rep Power: 13	Thank you so much for your responses. The cross section of my Porous media also keeps changing. Inlet and Outlet areas of the porous media are not the same. I will try to prepare a smaller model of the same porous structure and see the effects of change in area!!