one report for several plane sections

Newsim · June 12, 2020, 05:21

Perhaps someone faced a similar problem. I have a cylinder. I want to get a one report on several sections (from each), for example, angular momentum. But I need to use surface integral to do it, thus i get only one value from all sections. How I can do it separately not creating many reports (manually for more than 3 section is boring). I need to plot this value along Z axis (in cyl coord).

ping · July 6, 2020, 22:24

maybe take another approach and calc the ang.mom as a field function and then use a multisection or even integrate the new user field in some way.
using you method you could always record a short java macro and step one section plane thru the domain and report and plot in xl

June 12, 2020, 05:21	one report for several plane sections	#1
Newsim New Member Sergey Join Date: Dec 2015 Posts: 5 Rep Power: 10	Perhaps someone faced a similar problem. I have a cylinder. I want to get a one report on several sections (from each), for example, angular momentum. But I need to use surface integral to do it, thus i get only one value from all sections. How I can do it separately not creating many reports (manually for more than 3 section is boring). I need to plot this value along Z axis (in cyl coord).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM error	Vinay Kumar V	Main CFD Forum	0	February 20, 2020 09:17
[Commercial meshers] faceSet of a cutting plane for a internal patch definition	RubenGutiii	OpenFOAM Meshing & Mesh Conversion	1	April 17, 2019 05:10
[Gmsh] Problem with Gmsh	nishant_hull	OpenFOAM Meshing & Mesh Conversion	23	August 5, 2015 02:09
Plane stress and plane strain cases for stress analysis	Sargam05	OpenFOAM	0	May 3, 2013 18:16
[Gmsh] boundaries with gmshToFoam‏	ouafa	OpenFOAM Meshing & Mesh Conversion	7	May 21, 2010 12:43

July 6, 2020, 22:24		#2
ping Senior Member Ping Join Date: Mar 2009 Posts: 556 Rep Power: 20	maybe take another approach and calc the ang.mom as a field function and then use a multisection or even integrate the new user field in some way. using you method you could always record a short java macro and step one section plane thru the domain and report and plot in xl