Matching between parts problem

AlphaDelta · June 17, 2020, 13:14

Hi, I have a problem of matching between parts.
Both in geometry and in the mesh scene it is noted that the two parts (to which two different types of mesh are associated, polyhedral and polygonal) are not perfectly matching. Yet the parts are the result of operations such as subtract and intersect .... etc.
How can I solve it?
Thanks

ping · July 6, 2020, 10:10

this is normal when you dont or cant enforce a conformal mesh between the parts and should be taken care of by your interface if carefully set and checked

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Generate Parts Using Named Selection	jonasohlsson	ANSYS	1	March 14, 2016 04:32
[ICEM] Cylinder mesh - boundary condition parts problem	Fabio88	ANSYS Meshing & Geometry	0	February 15, 2016 09:06
Problem Importing Geometry ProE to CFX	fatb0y	CFX	3	January 14, 2012 19:42
Can I solve this problem by Fluent?	Kai_kc	FLUENT	1	October 27, 2010 05:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13

July 6, 2020, 10:10		#2
ping Senior Member Ping Join Date: Mar 2009 Posts: 556 Rep Power: 20	this is normal when you dont or cant enforce a conformal mesh between the parts and should be taken care of by your interface if carefully set and checked