CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   STAR-CCM+ (https://www.cfd-online.com/Forums/star-ccm/)
-   -   Defining Relative Humidity while Solving a Simulation with Droplet Evaporation (https://www.cfd-online.com/Forums/star-ccm/230522-defining-relative-humidity-while-solving-simulation-droplet-evaporation.html)

mohammad September 27, 2020 06:53

Defining Relative Humidity while Solving a Simulation with Droplet Evaporation
 
1 Attachment(s)
Dear all,

This is my first time working with the evaporation model in STARCCM+. I am going to simulate evaporation of water-glycerin droplets. I have used Lagrangian multi-phase with the following settings as shown in the attached picture. However, I am wondering where should I insert the relative humidity (RH)? As I know, two factors are very important, Temperature and RH. The temperature tab exists under the "Reference Values". However, there is no sign of RH.:confused::confused::confused:

Best,


All times are GMT -4. The time now is 05:24.