Want to use "Stick-to-Wall" model

lymbouras · January 14, 2021, 07:50

Hey guys I am new to STAR-CCM+, I mainly used FLUENT/ANSYS for my previous studies. I am looking to find the method to assume that particles stick on the surfaces instead of bouncing back during a simulation. In Fluent there is a "stick-to-wall" option for this, what is the theoretical model in STAR-CCM+ though?

Thanks,
Andreas

ping · January 18, 2021, 03:58

in star any wall boundary can have a range of settings for a Lagrangian phase - the default is rebound, but it can stick, vaporise, split etc

January 14, 2021, 07:50	Want to use "Stick-to-Wall" model	#1
lymbouras New Member Andreas Join Date: Jan 2021 Posts: 1 Rep Power: 0	Hey guys I am new to STAR-CCM+, I mainly used FLUENT/ANSYS for my previous studies. I am looking to find the method to assume that particles stick on the surfaces instead of bouncing back during a simulation. In Fluent there is a "stick-to-wall" option for this, what is the theoretical model in STAR-CCM+ though? Thanks, Andreas

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[IHFOAM] The IHFOAM Thread	Phicau	OpenFOAM Community Contributions	392	September 8, 2023 18:10
interFoam wave propagation and explosion of Courant number and residuals	ChiaraViola	OpenFOAM Running, Solving & CFD	1	June 26, 2019 05:36
NEW turbulence TRANSITIONAL model	giammy92	OpenFOAM	3	June 30, 2016 09:47
manualInjection model in sprayFoam	Mentalo	OpenFOAM Running, Solving & CFD	1	April 2, 2014 09:29
Problems bout CFD model of biomass gasification, Downdraft gasifier	wanglong	FLUENT	2	November 25, 2009 23:27

January 18, 2021, 03:58		#2
ping Senior Member Ping Join Date: Mar 2009 Posts: 556 Rep Power: 20	in star any wall boundary can have a range of settings for a Lagrangian phase - the default is rebound, but it can stick, vaporise, split etc