Star CCM+ many scenes in one

Mood · March 18, 2021, 07:12

Hi guys,

I use Star-ccm+ to make a cfd simulation for my thesis, and I would like to put many scenes in one like in this picture (see the link below).
Does anyone have an idea how to do that?

https://royalsocietypublishing.org/c...0190465f06.jpg
https://royalsocietypublishing.org/c...0190465f06.jpg

thank you guys

Chris13 · March 18, 2021, 10:16

That looks like it has just been edited afterwards.

So create the scenes that you want for different turbulence models, configurations or whatever you plan to show and put it all together for example in inkscape. Remember to use the same scales or normalize so that you can compare the results.

It would be helpful if you could share more information on what you want to show in your scenes.

Mood · March 18, 2021, 10:58

@ Chris13, thank you so much for your help

cwl · March 20, 2021, 11:53

Multiple solution history snapshots + annotations.

March 18, 2021, 07:12	Star CCM+ many scenes in one	#1
Mood New Member Join Date: Mar 2021 Posts: 3 Rep Power: 5	Hi guys, I use Star-ccm+ to make a cfd simulation for my thesis, and I would like to put many scenes in one like in this picture (see the link below). Does anyone have an idea how to do that? https://royalsocietypublishing.org/c...0190465f06.jpg https://royalsocietypublishing.org/c...0190465f06.jpg thank you guys

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 22:15
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 04:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 04:38
error in star ccm	maurizio	Siemens	3	October 16, 2007 05:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

March 18, 2021, 10:16		#2
Chris13 New Member Chris Join Date: Nov 2016 Location: Germany Posts: 27 Rep Power: 9	That looks like it has just been edited afterwards. So create the scenes that you want for different turbulence models, configurations or whatever you plan to show and put it all together for example in inkscape. Remember to use the same scales or normalize so that you can compare the results. It would be helpful if you could share more information on what you want to show in your scenes.

March 18, 2021, 10:58		#3
Mood New Member Join Date: Mar 2021 Posts: 3 Rep Power: 5	@ Chris13, thank you so much for your help

March 20, 2021, 11:53		#4
cwl Senior Member Chaotic Water Join Date: Jul 2012 Location: Elgrin Fau Posts: 435 Rep Power: 17	Multiple solution history snapshots + annotations.