CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Creating a Plane for performing a mass flow average report

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 6, 2021, 11:03
Default Creating a Plane for performing a mass flow average report
  #1
New Member
 
Yağız Ataberk ERİŞTİ
Join Date: Feb 2020
Posts: 5
Rep Power: 3
yagiz is on a distinguished road
Hi everyone,

I did a 2D nozzle analysis and I want to obtain the average mach number value at nozzle exit.

When I asked my supervisor, he told me that first I should create a new plane at nozzle exit and go to Report->Mass Flow Average->Functions->Mach Number->and select the plane that I created.

Because my analysis is in 2D, I couldn't create a plane so I tried to draw a line. But after I drew that line, I couldn't see it in parts tab or curves tab.

What should I do ?
__________________
-------------------------------------------------
Yağız Ataberk ERİŞTİ
TOBB ETU - Mechanical Engineering
yagiz is offline   Reply With Quote

Old   April 8, 2021, 09:09
Default
  #2
Senior Member
 
Matt
Join Date: Aug 2014
Posts: 861
Rep Power: 14
fluid23 is on a distinguished road
if you create a derived part > plane in a 2D model it will create a line.

if you still don't see the plane in your derived parts tab, then you probably didn't define the various inputs correctly.
fluid23 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating a Report Definitions Surface Plane Ben_Hmouda Main CFD Forum 2 March 15, 2021 12:18
y+ and u+ values with low-Re RANS turbulence models: utility + testcase florian_krause OpenFOAM 113 June 25, 2019 00:58
[OpenFOAM] Calculation of water mass flow rate through custom plane madfan123 ParaView 0 April 21, 2017 08:19
Low Mixing time Problem Mavier CFX 5 April 29, 2013 00:00
how to report mass flow rate at line-surf suman kandula FLUENT 2 August 24, 2007 20:30


All times are GMT -4. The time now is 16:07.