CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

How can I find force coefficients on a portion of a surface in STAR-CCM+?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By DrDerpy13

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 2, 2021, 08:32
Default How can I find force coefficients on a portion of a surface in STAR-CCM+?
  #1
New Member
 
Mohammad Sheikholeslami
Join Date: Apr 2021
Posts: 4
Rep Power: 2
SheikhShip is on a distinguished road
In the report window of STAR-CCM+, the input should be a part or region boundary. How could a portion of a part or region boundary be selected as input?
SheikhShip is offline   Reply With Quote

Old   June 5, 2021, 17:20
Default
  #2
New Member
 
Vlad
Join Date: Oct 2020
Posts: 13
Rep Power: 2
DrDerpy13 is on a distinguished road
hmm... i think it could be done by isolating naming that surface in repair mode or in 3d cad, before doing the simulation
SheikhShip likes this.
DrDerpy13 is offline   Reply With Quote

Old   June 7, 2021, 09:08
Default
  #3
New Member
 
Mohammad Sheikholeslami
Join Date: Apr 2021
Posts: 4
Rep Power: 2
SheikhShip is on a distinguished road
Thank you. Unfortunately, my simulations are finished, and there is no way to reinitiate or continue them.
SheikhShip is offline   Reply With Quote

Old   June 12, 2021, 17:33
Default
  #4
cwl
Senior Member
 
Chaotic Water
Join Date: Jul 2012
Location: Elgrin Fau
Posts: 254
Rep Power: 13
cwl is on a distinguished road
Derived Parts -> Threshold might help.
cwl is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
calculating Added mass and damping force coefficients matrix nima99 STAR-CCM+ 0 December 3, 2019 03:56
Processor boundary error surface tension force jameswilson620 Main CFD Forum 4 October 30, 2017 17:31
Surface Roughness Application in Star CCM+? Brock17 STAR-CCM+ 1 May 18, 2017 19:47
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 04:04
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15


All times are GMT -4. The time now is 09:50.