CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Attempt to access unallocated Phase1::VolumeFractionLevel1 storage in cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By LuckyTran

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 22, 2021, 04:19
Default Attempt to access unallocated Phase1::VolumeFractionLevel1 storage in cells
  #1
New Member
 
Kelvin Eloho
Join Date: Mar 2020
Posts: 7
Rep Power: 4
Kelysamex is on a distinguished road
Hi,

I intend to run a simulation aimed to capture cavitation. I previously achieved the intake wake and then ran a non-cavitating simulation. The non-cavitating simulation is just for a one-phase fluid i.e. H2O. No multiphase defined. After obtaining this results. I initiated the VOF and multiphase which includes liquid and gas.

I keep on getting this error when I do this:

" Attempt to access unallocated Phase1::VolumeFractionLevel1 storage in cells in Fluid
Processor: 105
Recoverability: Non-recoverable "

Does anyone have an idea on how to fix this?
Kelysamex is offline   Reply With Quote

Old   November 22, 2021, 08:42
Default
  #2
Senior Member
 
Lucky
Join Date: Apr 2011
Location: Orlando, FL USA
Posts: 4,928
Rep Power: 58
LuckyTran has a spectacular aura aboutLuckyTran has a spectacular aura aboutLuckyTran has a spectacular aura about
Initialize your case


The error is self explanatory but if that doesn't work you're going to have to describe better the events leading up to error.
Kelysamex likes this.
LuckyTran is online now   Reply With Quote

Old   November 22, 2021, 08:50
Default
  #3
New Member
 
Kelvin Eloho
Join Date: Mar 2020
Posts: 7
Rep Power: 4
Kelysamex is on a distinguished road
Quote:
Originally Posted by LuckyTran View Post
Initialize your case


The error is self explanatory but if that doesn't work you're going to have to describe better the events leading up to error.
Thanks for your response. I already initialized it. Before this error, I have run 6000 steady state iterations. During this, the domain was just liquid (single phase).
Then, I ran unsteady simulations summing over 50,000 iterations.
After which, I switched to a dual phased fluid i.e. water and vapour. Some other models were included. These are a multiphase interaction model and the VOF.
Kelysamex is offline   Reply With Quote

Reply

Tags
cavitation, multiphase, star-ccm+, vof, volume fraction

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Foam::error::PrintStack almir OpenFOAM Running, Solving & CFD 90 October 3, 2019 07:01
cellZone not taking all the cells inside rahulksoni OpenFOAM Running, Solving & CFD 6 January 25, 2019 00:11
Problem with divergence TDK FLUENT 13 December 14, 2018 06:00
The udf.h headers are unable to open- in VISUAL STUDIO 13 sanjeetlimbu Fluent UDF and Scheme Programming 4 May 2, 2016 05:38
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 21:11


All times are GMT -4. The time now is 21:14.