Mesh error due to storage capacity exceeded

yk1e20 · November 22, 2021, 17:02

Hello,

I've been running into this error every time I try to mesh. I have tried reducing the number of cells by increasing the target size, reducing the boundary region size but haven't been able to get it to run. Has anyone encountered this error? What can I do to solve the issue?

Code:

PARALLEL_FATAL: Storage capacity has been exceeded.:   (../../../trimmer/src/trimmer/Trimmer.cpp:1774)
ERROR: Parallel volume meshing fatal error
Command: GenerateVolumeMesh
   error: Server Error
ERROR: Parallel volume meshing fatal error
Command: GenerateVolumeMesh
   command: CommandComplete
   error: Server Error

ashokac7 · November 23, 2021, 01:47

First of all, turn off parallel meshing. Go with the series. Also mesh on single core. Don't pull multiple cores during opening sim file. The theory being, handling mesh parallelly costs more computer recourse. And the last option is to increase your RAM. One thing you can still check is if you have populated right memory slots.

yk1e20 · November 23, 2021, 06:16

Quote:

Originally Posted by ashokac7

First of all, turn off parallel meshing. Go with the series. Also mesh on single core. Don't pull multiple cores during opening sim file. The theory being, handling mesh parallelly costs more computer recourse. And the last option is to increase your RAM. One thing you can still check is if you have populated right memory slots.

I tried running it in serial but its still not working. I am running it with 162000MB of RAM on HPC. Still not sure what's going.

ashokac7 · November 24, 2021, 02:06

Quote:

Originally Posted by yk1e20

I tried running it in serial but its still not working. I am running it with 162000MB of RAM on HPC. Still not sure what's going.

Did you tried surface mesh only option first. Can you do the surface mesh. check surface mesh thoroughly to see unnecessary refinement. Deselect proximity refinement. These errors during meshing can happen. Sometimes Solution is to starts fresh.

Are you getting same error during serial meshing?

P.S. Try to provide sufficient info to get better answers here.

November 22, 2021, 17:02	Mesh error due to storage capacity exceeded	#1
yk1e20 New Member Join Date: Nov 2021 Posts: 3 Rep Power: 4	Hello, I've been running into this error every time I try to mesh. I have tried reducing the number of cells by increasing the target size, reducing the boundary region size but haven't been able to get it to run. Has anyone encountered this error? What can I do to solve the issue? Code: PARALLEL_FATAL: Storage capacity has been exceeded.: (../../../trimmer/src/trimmer/Trimmer.cpp:1774) ERROR: Parallel volume meshing fatal error Command: GenerateVolumeMesh error: Server Error ERROR: Parallel volume meshing fatal error Command: GenerateVolumeMesh command: CommandComplete error: Server Error

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell	Arman_N	OpenFOAM Meshing & Mesh Conversion	1	May 20, 2019 17:16
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
Storage alloction failed in cfx mesh	Mario Tremblay	CFX	2	March 6, 2009 10:35

November 23, 2021, 01:47		#2
ashokac7 Senior Member Ashok Chaudhari Join Date: Aug 2016 Location: Pune, India Posts: 260 Rep Power: 10	First of all, turn off parallel meshing. Go with the series. Also mesh on single core. Don't pull multiple cores during opening sim file. The theory being, handling mesh parallelly costs more computer recourse. And the last option is to increase your RAM. One thing you can still check is if you have populated right memory slots.