|
[Sponsors] |
Implementing Film Evaporation Model for EMP Flow |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 22, 2024, 12:25 |
Implementing Film Evaporation Model for EMP Flow
|
#1 |
New Member
Austin Morse
Join Date: Jan 2024
Posts: 1
Rep Power: 0 |
Hello,
For my research internship, I've been tasked with helping to create a Digital Twin model of a small methalox rocket engine in Star-CCM+. My part in this is designing the engine chamber simulation, including multiphase fuel injection and combustion, with simulation of the engine's Fuel Film Cooling system cooling system. Unfortunately, due to the requirement of the combustion part of the sim to use an enthalpy-based energy solver, the model must use Eulerian Multiphase, which is not compatible with Film Evaporation according to documentation. Does anyone have experience with/know a way to either program a custom physics model to implement this capability or simulate the mass transfer with field functions? Thank you! |
|
Tags |
combustion chamber, eulerian multiphase, film cooling |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
unable to run dynamic mesh(6dof) and wave UDF | shedo | Fluent UDF and Scheme Programming | 0 | July 1, 2022 18:22 |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 07:40 |
Evaporation model in ansys Fluent 12.1 | oldisbest | Fluent UDF and Scheme Programming | 12 | March 26, 2020 10:11 |
interFoam wave propagation and explosion of Courant number and residuals | ChiaraViola | OpenFOAM Running, Solving & CFD | 1 | June 26, 2019 06:36 |
Thin film flow in triangular duct | Swapnil | CFX | 4 | December 4, 2002 17:08 |