Home > Forums > Software User Forums > Siemens > STAR-CCM+

Creating multiple layer solid shells

Mark Forums Read

Reply

Search this Thread

May 15, 2025, 01:57	Creating multiple layer solid shells	#1
demirsozm New Member Join Date: May 2021 Posts: 1 Rep Power: 0	Dear All, Can I create multiple layer solid shell regions with starccm? As I understand I can create laminates but if I am not mistaken this only calculates average thermophysical properties based on thickness values. I want multiple layers with different k cp and rho using shell conduction. Is it possible?

Reply

Tags

shell conduction, starccm, thermal analysis

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Holes in internal mesh when adding boundary layer snappyHex	otaolafr	OpenFOAM Meshing & Mesh Conversion	4	April 8, 2025 16:01
Conjugate Heat Transfer: Solid Time Step in Transient Simulation, DO Model	Dingens	FLUENT	0	July 9, 2021 07:19
[snappyHexMesh] snappyHexMesh Boundary Layer at Corner	panpanzhong	OpenFOAM Meshing & Mesh Conversion	5	July 3, 2018 06:53
[snappyHexMesh] Layers in snappy collapse in some places of my solid	Yuby	OpenFOAM Meshing & Mesh Conversion	0	March 8, 2015 16:44
CFX4.3 -build analysis form	Chie Min	CFX	5	July 13, 2001 00:19

All times are GMT -4. The time now is 20:43.