CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- STAR-CCM+ (https://www.cfd-online.com/Forums/star-ccm/)

- - Server Error (https://www.cfd-online.com/Forums/star-ccm/66509-server-error.html)

Good morning from italy. I have a problem with star-ccm 3.06.006 32 and 64 bit. I launch the volume mesh for a complex geometry (a car imported with surface mesh from ansa) and i receive the error:
Exception (bad_alloc):
A request for memory failed. This is typically due to insufficient virtual memory.
The virtual memory is however setted to 24 gb on all my hard disk.
Before the error seems that the tethraedical mesh is really completed but the error is always the same.
Please help me is important for thesis of degree.Thank you
My system is
asus striker extreme
q6600
8gb ram
500 gb hard disk-250gb-120 gb

Did you solve your problem?
I have the same problem...

Code:

starting: Improve Quality

Error during surface remeshing, deleting resulting mesh



A request for memory failed. This is typically due to insufficient virtual memory.:

   Command: GenerateSurfaceMesh

   CompletedCommand: GenerateSurfaceMesh

   In: [Machine::main]

   Recoverability: Non-recoverable

   error: Server Error

I think I have it.
When I import a stl file I get this error.
When I import the same part as a step file I get the error that the body is not closed.
Other files are no problem with good solids.