CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   STAR-CCM+ (https://www.cfd-online.com/Forums/star-ccm/)
-   -   C-Grid (https://www.cfd-online.com/Forums/star-ccm/70685-c-grid.html)

Alpro_Soya December 2, 2009 10:35

C-Grid
 
Hi,

Is it possible to create a C-Grid in starccm+? If not, is there any free software I could use to do this (unlikely, I know)?

Thanks in advance,

Al

kyle December 2, 2009 15:06

1. It probably is not necessary, just use a bunch of prism layers.

2. If you have a Prostar license you could build it there.

3. You could use blockmesh, which is free and part of the OpenFOAM package. There is no GUI.

Alpro_Soya December 2, 2009 17:08

Thanks Kyle.

I have been trying to use prism layers, but I find that there is a limit on how thick I can get them. I keep increasing the prism layer thickness value but don't see an increase in the thickness. Any ideas why this might be?

I took a look at OpenFOAM, but it didn't look particularly friendly...


All times are GMT -4. The time now is 15:33.