Error during volume meshing "Surface is not qualified for meshing"

scorpionbay2 · December 21, 2009, 08:53

Hi

i have this problem, when start volume meshing .....

CheckSurface::checkIntersection: Surface is not qualified for meshing:
Command: GenerateVolumeMesh
CompletedCommand: GenerateVolumeMesh
In: [Machine::main]
Recoverability: Non-recoverable
error: Server Error

Have you any tips to repair the error?

thanks

Gabriele

bramv101 · December 21, 2009, 11:14

I would say use the repair tools and have a look at the problem, try to use auto repair. If this doesnt work try some geometry manipulation. Or try the wrapper without loosing to much detail

December 21, 2009, 08:53	Error during volume meshing "Surface is not qualified for meshing"	#1
scorpionbay2 New Member Gabriele Di Trapani Join Date: Dec 2009 Posts: 1 Rep Power: 0	Hi i have this problem, when start volume meshing ..... CheckSurface::checkIntersection: Surface is not qualified for meshing: Command: GenerateVolumeMesh CompletedCommand: GenerateVolumeMesh In: [Machine::main] Recoverability: Non-recoverable error: Server Error Have you any tips to repair the error? thanks Gabriele

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GAMBIT] Issues with Cooper Volume Meshing	Forrest	ANSYS Meshing & Geometry	6	September 19, 2018 04:07
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
On the damBreak4phaseFine cases	paean	OpenFOAM Running, Solving & CFD	0	November 14, 2008 21:14
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00

December 21, 2009, 11:14		#2
bramv101 Member TonyD Join Date: Apr 2009 Posts: 85 Rep Power: 17	I would say use the repair tools and have a look at the problem, try to use auto repair. If this doesnt work try some geometry manipulation. Or try the wrapper without loosing to much detail