Looking for suggestions about how to set up a boundary condition

plaunie · February 25, 2010, 17:08

I would like to model a multi-component gas flowing over a membrane which allows one of the components to diffuse through it. Not sure how to set up the problem in star ccm.

can I define a boundary with a negative mass flow based on a field function which looks at the local mass fraction of that gas component?

Is this asking for trouble or does anyone have other ideas about how to set it up?

Thanks for your help.

naimishharpal · February 28, 2010, 13:14

Regrading your membrane BC, to diffuse multi-component gas, you can define that boundary as 'Pressure Outlet'. Then define pressure and the mass-fraction (between 0 and 1 w.r.t to total mass-fraction) of particular gas to be sucked out. You may calculate the pressure in terms of velocity and mass flow rate using simple Bernoulli' equation.

I hope that this may help you.

plaunie · March 23, 2010, 15:12

Quote:

Originally Posted by naimishharpal

Regrading your membrane BC, to diffuse multi-component gas, you can define that boundary as 'Pressure Outlet'. Then define pressure and the mass-fraction (between 0 and 1 w.r.t to total mass-fraction) of particular gas to be sucked out. You may calculate the pressure in terms of velocity and mass flow rate using simple Bernoulli' equation.

I hope that this may help you.

On a pressure outlet boundary, doesn't the mass fraction (species specification) only apply when there is backflow?

plaunie · April 6, 2010, 13:08

CD-adapco said there is no way to specify a per species boundary condition and trying to come up with a work-around.

February 25, 2010, 17:08	Looking for suggestions about how to set up a boundary condition	#1
plaunie New Member Pete Launie Join Date: Feb 2010 Posts: 10 Rep Power: 16	I would like to model a multi-component gas flowing over a membrane which allows one of the components to diffuse through it. Not sure how to set up the problem in star ccm. can I define a boundary with a negative mass flow based on a field function which looks at the local mass fraction of that gas component? Is this asking for trouble or does anyone have other ideas about how to set it up? Thanks for your help.

April 6, 2010, 13:08	Update	#4
plaunie New Member Pete Launie Join Date: Feb 2010 Posts: 10 Rep Power: 16	CD-adapco said there is no way to specify a per species boundary condition and trying to come up with a work-around.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to set boundary condition for a tank filling w	namrata	FLUENT	6	May 2, 2007 10:23
Rotating interpolated boundary condition	hani	OpenFOAM Running, Solving & CFD	0	July 4, 2006 07:09
Convective Heat Transfer - Heat Exchanger	Mark	CFX	6	November 15, 2004 15:55
how to set the porous boundary condition	chocheng	FLUENT	2	March 22, 2001 13:42
how to set boundary condition about porous zone	chocheng	FLUENT	1	March 21, 2001 20:02

February 28, 2010, 13:14		#2
naimishharpal Member Naimish Harpal (MS Aerospace Engr) Join Date: Jul 2009 Location: Long Beach, CA Posts: 50 Rep Power: 16	Regrading your membrane BC, to diffuse multi-component gas, you can define that boundary as 'Pressure Outlet'. Then define pressure and the mass-fraction (between 0 and 1 w.r.t to total mass-fraction) of particular gas to be sucked out. You may calculate the pressure in terms of velocity and mass flow rate using simple Bernoulli' equation. I hope that this may help you.