CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   STAR-CCM+ (https://www.cfd-online.com/Forums/star-ccm/)
-   -   Conformal Mesh in Multi Phase Flows (https://www.cfd-online.com/Forums/star-ccm/73646-conformal-mesh-multi-phase-flows.html)

ziyasaydam March 13, 2010 10:37

Conformal Mesh in Multi Phase Flows
 
Hi,

Has anyone managed to create a conformal mesh at the interfaces with the trimmer meshing model in multi phase applications? In the user's guide, it is nor clear if this can be done or not.

Thanks,

Ziya

f-w March 15, 2010 11:53

It can't as of v5.02, conformal mesh at the interfaces for multi-region simulations can only be done with polyhedral mesh.

Vinicius March 16, 2010 16:29

Define the interface as an ´in-place´ one, and create just one mesh continuum for your regions. This way you should have a conformal mesh at the interfaces.


All times are GMT -4. The time now is 03:17.