CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

remeshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 26, 2010, 11:03
Default remeshing
  #1
New Member
 
Johannes
Join Date: May 2009
Posts: 16
Rep Power: 16
jopawipr is on a distinguished road
Hey everybody!
I have some problems with my moving mesh. In the beginning the mesh is pretty good. After a third of the time-steps, the mesh quality is so bad, the simulation ends.
So my idea was to remesh the mesh every 5, 10...time step.
Is it possible to do that with a macro?
Or do you have other ideas to realize a moving mesh?
Thanks for your help!
jopawipr is offline   Reply With Quote

Old   May 26, 2010, 17:43
Default
  #2
Member
 
John
Join Date: Aug 2009
Posts: 92
Rep Power: 16
nomad is on a distinguished road
Get rid of any prism layers in your interface and rotating regions.
nomad is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bugg in Remeshing in 3D - Any Fluent Wizards ?? Amr FLUENT 1 November 1, 2011 05:04
CFX 12.0 remeshing error songxguan CFX 1 November 26, 2009 07:14
Dynamic mesh (local remeshing) I'm stuck Mike FLUENT 2 February 26, 2006 15:00
Dynamic Grid Remeshing causing Divergence? Andrew Wick FLUENT 0 January 23, 2006 19:39
Dynamic_Mesh for large mvt : remeshing parameters! caloggero FLUENT 3 May 6, 2003 06:44


All times are GMT -4. The time now is 08:23.