CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Distribution of deposition of particles

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 24, 2010, 00:07
Default Distribution of deposition of particles
  #1
New Member
 
shahab
Join Date: Aug 2010
Posts: 1
Rep Power: 0
shay is on a distinguished road
Hi
I was wondering if anyone could let know the way that I could show the distribution of deposition of particles in a pipe.
I am running an internal flow that particles are injected into the system ( Lagrangian multiphase analysis) using Star CCM+.
Air enters through the inlet of a pipe ( or a tube), the pipe along the way ,splits into two pipes and air exits through 2 outlets. I am using a k-omega turbulent model.

Also if anyone knows how the particles can be captured by a wall, rather than using Rebound or Escape as a boundary Condition. Thank you for your help

With thanks
Shay
shay is offline   Reply With Quote

Old   November 8, 2010, 01:31
Default
  #2
rcm
New Member
 
chetan
Join Date: Apr 2010
Posts: 11
Rep Power: 15
rcm is on a distinguished road
contor plot of incident mass flux will show u where droplets are impinging(use only two colors in plot).take surface integral of incident mass flux on particular surface this will give u mass of droplets reaching that surface, u can do it susquently for other surfaces then u can plot percentage of droplets reaching each surface
rcm is offline   Reply With Quote

Reply

Tags
deposition, distribution, lagrangian, particles, star ccm+

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to determine the number of particles injected. welch FLUENT 2 January 18, 2024 05:08
particles model ati_ros61 FLOW-3D 3 December 6, 2009 17:03
Mass Flow for deposition of particles Machteld Rinkel CFX 0 March 10, 2004 04:48
Distribution of particles around porous media CHUBBY FLUENT 1 April 30, 2001 17:26
particles deposition frederic felten FLUENT 0 November 24, 1999 15:52


All times are GMT -4. The time now is 09:05.