Equivalent of Gambit neutral file in star ccm

pradeap · June 30, 2010, 11:18

What is the equivalent of Ansys Gambit neutral file in Star ccm+.

how to generate the file which contains mesh information( as gambit neutral file ) in STAR ccm+

RobertB · June 30, 2010, 18:20

You could export a ccm file to STAR 4 and then write out the information from there.

pradeap · July 2, 2010, 07:09

Thanks for you reply, would be tell me in detail, how to get the star 4 format and how to get the information...

RobertB · July 2, 2010, 07:36

You first export a ccm geometry file from CCM+

you RCCM the file into star 4

If you type HELP CONVERT it will show you the available options - some are read only. The command DIRECTION sets whether you are importing or exporting.

You also have the VWRITE and CWRITE commands. The cell file format has become notably more difficult to reconstruct since moving to polys. The file formats for the VWRITE/CWRITE commands are in an appendix of the manual.

There is a program from CD that will take a STAR 4 cell/vertex files with non poly cells and convert it to a STAR 3 format, which is easier to handle. There is another recent thread on this topic.

June 30, 2010, 11:18	Equivalent of Gambit neutral file in star ccm	#1
pradeap New Member kumar Join Date: Jun 2010 Posts: 20 Rep Power: 15	What is the equivalent of Ansys Gambit neutral file in Star ccm+. how to generate the file which contains mesh information( as gambit neutral file ) in STAR ccm+

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] Compiling gmshFoam with OpenFOAM-1.5	BlGene	OpenFOAM Meshing & Mesh Conversion	10	August 6, 2009 04:26
[OpenFOAM] ParaView 33 canbt open OpenFoam file	hariya03	ParaView	7	September 25, 2008 17:33
Results saving in CFD	hawk	Main CFD Forum	16	July 21, 2005 20:51
PHI file structure	Eugene	Phoenics	9	November 2, 2001 22:00
How to import the Gambit file in star cd 3.05 NT	Sangwon Kim	Siemens	1	February 16, 2001 08:41

June 30, 2010, 18:20		#2
RobertB Senior Member Robert Join Date: Jun 2010 Posts: 117 Rep Power: 16	You could export a ccm file to STAR 4 and then write out the information from there.

July 2, 2010, 07:09		#3
pradeap New Member kumar Join Date: Jun 2010 Posts: 20 Rep Power: 15	Thanks for you reply, would be tell me in detail, how to get the star 4 format and how to get the information...

July 2, 2010, 07:36		#4
RobertB Senior Member Robert Join Date: Jun 2010 Posts: 117 Rep Power: 16	You first export a ccm geometry file from CCM+ you RCCM the file into star 4 If you type HELP CONVERT it will show you the available options - some are read only. The command DIRECTION sets whether you are importing or exporting. You also have the VWRITE and CWRITE commands. The cell file format has become notably more difficult to reconstruct since moving to polys. The file formats for the VWRITE/CWRITE commands are in an appendix of the manual. There is a program from CD that will take a STAR 4 cell/vertex files with non poly cells and convert it to a STAR 3 format, which is easier to handle. There is another recent thread on this topic.