|
[Sponsors] |
April 11, 2011, 04:56 |
Rotor stator with STAR-CCM+
|
#1 |
New Member
Andrea Rinaldi
Join Date: Apr 2011
Posts: 2
Rep Power: 0 |
Hy to all,
I am quite new to Star-CCM+. I have to simulate a simply 2D axial rotor/stator System. Assume the mesh as a rectangule with vertex named ABCD: AB rotor side BC atm pressure CD stator side DA axis. I have set the boundary condition basically setting on AB tangential velocity speed around DA but acutally nothing happend. How can I make it?Is there any particular option to be set? thankyou |
|
April 12, 2011, 08:19 |
|
#2 |
New Member
Michele
Join Date: Apr 2011
Posts: 17
Rep Power: 15 |
Can you attach an image of what you mean?
|
|
April 12, 2011, 08:31 |
|
#3 |
New Member
Andrea Rinaldi
Join Date: Apr 2011
Posts: 2
Rep Power: 0 |
Hy, I make a quick paint sketch..
hope it's enought! thanks |
|
February 27, 2021, 13:43 |
cantrifuge axial compressor
|
#5 |
New Member
Birsen
Join Date: Mar 2017
Posts: 3
Rep Power: 9 |
hii, I need help for Cantrifuge axial compressor. How I can creat 3d part in Starcc+? I have 11 stator and 11 rotor and cover them. how I can creat and transfer in region to definede bounderies.?
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
Fluent Vs Star CCM | firda | Main CFD Forum | 3 | February 26, 2011 02:51 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |