Plotting a Monitered Data vs. Physical Time

SimulatorMaster · June 14, 2021, 07:10

Hello all

Hope you are doing well.

I have conducted a simulation in order to observe turbulence behavior in a tunnel. I have several points to capture velocity data and Monitor field functions to observe parameters such as variance covariance, Field Mean for velocity, Strain Tensors and such.

Now the problem is that I have forgot to implement a point in the region in which I also had to obtain velocity data.

Now I have several Field Means under Monitor section in which I can pull data from without needing to again capture the data for the missing point by re-running the simulation. But I cannot plot all the samples vs physical time which is not available as a scalar function so I tried iterations; however, it only displays the latest solved value(so the Sim. ended at 400k iterations and it shows the result at 400k).

Is there anyway to solve this problem?

Thank you for your time.

Sincerely
Onur

Nikpap · June 15, 2021, 12:04

I think star does not keep all the previous values in transient simulations.

What I do is that I make a table with the quantities I want and automatically export it every x amount of timesteps.

However this would mean that you'll have to rerun your simulations

SimulatorMaster · June 16, 2021, 11:19

Yes unfortunately it seems that I need to rerun the simulation. Though thanks for the reply!

June 14, 2021, 07:10	Plotting a Monitered Data vs. Physical Time	#1
SimulatorMaster New Member Onur Join Date: Dec 2018 Location: Turkey Posts: 25 Rep Power: 7	Hello all Hope you are doing well. I have conducted a simulation in order to observe turbulence behavior in a tunnel. I have several points to capture velocity data and Monitor field functions to observe parameters such as variance covariance, Field Mean for velocity, Strain Tensors and such. Now the problem is that I have forgot to implement a point in the region in which I also had to obtain velocity data. Now I have several Field Means under Monitor section in which I can pull data from without needing to again capture the data for the missing point by re-running the simulation. But I cannot plot all the samples vs physical time which is not available as a scalar function so I tried iterations; however, it only displays the latest solved value(so the Sim. ended at 400k iterations and it shows the result at 400k). Is there anyway to solve this problem? Thank you for your time. Sincerely Onur

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bash script for pseudo-parallel usage of reconstructPar	kwardle	OpenFOAM Post-Processing	41	August 23, 2023 02:48
[Other] Contribution a new utility: refine wall layer mesh based on yPlus field	lakeat	OpenFOAM Community Contributions	58	December 23, 2021 02:36
Inconsistencies in reading .dat file during run time in new injection model	Scram_1	OpenFOAM	0	March 23, 2018 22:29
Star cd es-ice solver error	ernarasimman	STAR-CD	2	September 12, 2014 00:01
mixerVesselAMI2D's mass is not balancing	sharonyue	OpenFOAM Running, Solving & CFD	6	June 10, 2013 09:34

June 15, 2021, 12:04		#2
Nikpap New Member Nikolaos Papafilippou Join Date: Apr 2019 Posts: 25 Rep Power: 7	I think star does not keep all the previous values in transient simulations. What I do is that I make a table with the quantities I want and automatically export it every x amount of timesteps. However this would mean that you'll have to rerun your simulations

June 16, 2021, 11:19		#3
SimulatorMaster New Member Onur Join Date: Dec 2018 Location: Turkey Posts: 25 Rep Power: 7	Yes unfortunately it seems that I need to rerun the simulation. Though thanks for the reply!