orient and/or flip face normals

husker · September 21, 2011, 01:52

Hi,

How can we orient or flip face normals? I have some boundaries which have reverse normals so I have to flip them. Any ideas?

Regards

husker · September 23, 2011, 03:11

I'm so surprised that 26 people read but have nothing to say about this topic.
I would like to flip the normals for the flexibility of both prism layer and extrude methods. However CCM users who experienced Gridgen and/or TGrid will understand me easily.

Regards

abdul099 · September 24, 2011, 18:00

Funny, I was one of the 26, but I didn't had any solution for your "problem". This might be due to a special reason:
You might be right, users who experienced Gridgen and/or TGrid will understand you easily. But I never felt the need to flip face normals during all my time with Star-CCM+. Therefore I just don't know what you want to do and what you expect as result!

When you are using a software, you should not try to copy the procedure from other software packages. Otherwise you will feel like a pilot driving a car who desperatly searches the rudder pedals - but there are no rudder pedals in a car, because a car is completely different to an airplane and you don't need them...
I hope you got the point.

ara1362 · September 29, 2011, 01:26

if you are using star-cd (Pro-star) then there is a command called corient all
in ccm+ there is no such a command, best thing is to export the boundary as .dbs or .stl and reimport it. this will re orient the boundary.

Let me know if this helps.

September 21, 2011, 01:52	orient and/or flip face normals	#1
husker Member Join Date: Mar 2009 Posts: 85 Rep Power: 17	Hi, How can we orient or flip face normals? I have some boundaries which have reverse normals so I have to flip them. Any ideas? Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Netgen] Import netgen mesh to OpenFOAM	hsieh	OpenFOAM Meshing & Mesh Conversion	32	September 13, 2011 05:50
[blockMesh] BlockMeshmergePatchPairs	hjasak	OpenFOAM Meshing & Mesh Conversion	11	August 15, 2008 07:36
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

September 23, 2011, 03:11		#2
husker Member Join Date: Mar 2009 Posts: 85 Rep Power: 17	I'm so surprised that 26 people read but have nothing to say about this topic. I would like to flip the normals for the flexibility of both prism layer and extrude methods. However CCM users who experienced Gridgen and/or TGrid will understand me easily. Regards

September 24, 2011, 18:00		#3
abdul099 Senior Member Join Date: Oct 2009 Location: Germany Posts: 636 Rep Power: 21	Funny, I was one of the 26, but I didn't had any solution for your "problem". This might be due to a special reason: You might be right, users who experienced Gridgen and/or TGrid will understand you easily. But I never felt the need to flip face normals during all my time with Star-CCM+. Therefore I just don't know what you want to do and what you expect as result! When you are using a software, you should not try to copy the procedure from other software packages. Otherwise you will feel like a pilot driving a car who desperatly searches the rudder pedals - but there are no rudder pedals in a car, because a car is completely different to an airplane and you don't need them... I hope you got the point.

September 29, 2011, 01:26		#4
ara1362 New Member ara Join Date: Apr 2011 Posts: 8 Rep Power: 15	if you are using star-cd (Pro-star) then there is a command called corient all in ccm+ there is no such a command, best thing is to export the boundary as .dbs or .stl and reimport it. this will re orient the boundary. Let me know if this helps.