|
[Sponsors] |
April 22, 2014, 07:33 |
Multi-component fuel in proSTAR 4.18
|
#1 |
New Member
Join Date: Sep 2012
Posts: 5
Rep Power: 13 |
Hi,
I'm trying to apply a multi-component fuel to an engine-model in proSTAR 4.18. Therefore, I click in the pro-STAR menu bar "Advanced" > "IC Setup" and choose for the ECFM-3Z, spark for example the fuel-components gasoline1 and ethanol. When I try to apply the setting via "Write data" > "Apply and close" I get the following error message: ` **ERROR - NO MORE THAN 10 NESTED LEVELS OF *IF/*ENDIF ALLOWED LOOP IS PREMATURELY CANCELED Since pro-STAR does the job automatically there is nothing I can change in the script-code. If I only configure a single-component fuel the error won't occur. Any ideas how to solve this? |
|
April 28, 2014, 18:02 |
|
#2 |
New Member
|
One question. Are you using the ES-ICE to build your model? If yes, you must change these variables direct in the es-ice.
|
|
April 29, 2014, 04:43 |
|
#3 | |
New Member
Join Date: Sep 2012
Posts: 5
Rep Power: 13 |
Quote:
For example, the multi-component fuel in es-ice consists of 90% gasoline1 and 10% ethanol. But in pro-STAR only gasoline gets a scalar entry. Besides, there is only one chemical scheme under chemical reactions. It seems to me, that the second component ethanol is not considered in pro-STAR. |
||
May 2, 2014, 01:46 |
Abaqus
|
#4 |
New Member
Zahid Ibrahim Mohammed
Join Date: Jul 2013
Posts: 4
Rep Power: 12 |
Dear Madam, Sir
Please help me, I use Star-CCM+ to get pressure from two phase flow, My problem is I want to export pressure from star to the pipe drawn in Abaqus but I do not know the steps to link between Star and Abaqus Thank you |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multi component analysis | wanfuhh | Main CFD Forum | 0 | October 9, 2013 12:52 |
Multi Component Flow Modeling | bmatsuo | ANSYS | 0 | June 23, 2011 20:13 |
Add total mass using sources to multi component fluids | mullenc525 | CFX | 1 | February 5, 2011 04:56 |
multi component | ranap | Main CFD Forum | 1 | October 8, 2008 03:00 |
multi component diffusivity | mahut | FLUENT | 0 | October 10, 2007 04:05 |