Problem with creating the 2D base template in es-ice 4.18
 

Hi All,

I am encountering with a problem in creating the 2D bas template for Valve 1. I manually created my valve profile as stated in User Guide with point p1, p2, p3, p4, p10, p20. My valve dont have chamfer so i select p1 and P2 with same radius.

Now, during creating template, in the section 1 tool panel, i load vavle01.dat file and set all other parameters. When i pressed Create button, "could not create Section with the given parameters. Please check that the valve is inside the cylinder". However my valve is inside the cylinder and there is agap of 1.35mm between valve surface and cylinder surface.

Please help me to solve this problem.

Thanks
Kevin G